top of page

MS6-360 (Standard Unit) Saf

Cross references: TRU-360 Eaton TRU-360 Cuttler Hammer MKS-360 ABB (Standard unit) MKS-360-OT ABB (Standard unit) Amperage: 360 Amps Voltage: Between 250 and 300 HP at 575V Between 200 and 300 HP at 460V Between 60 and 100 HP at 240V Serial: MS6 FREE INSPECTION FOR THIS SOFTSTART

Numéro de pièce du fabricant : 

123-456-789

Manufacturer part number : 

MS6-360 (Standard Unit)

Détails

MS6-360 (Standard Unit) Saf


Serial MS6

 


Error codes

 

 

 

 

Code 1501   Fault name : Shear Pin Fault

                   Description : Enables and disables the shear pin fault.

                                      The shear pin fault is automatically disabled during jog.

 

Code 1502   Fault name : MOL Fault

                   Description : Sets up the class of overload that will be used.

                                      Can also disable the overload.

 

Code 1503   Fault name : Overload Level

                   Description : Represents has a percentage the amount of overload that has accumulated.

                                      Once this level reaches 100% the Opal will trop on a MOL FLT

                                       This level will increase based on the class set in parameter 1502 any time that the current feedback is above the name place current (parameter 1301) multiplied by the service factor (parameter 1303).

                                       This level will decrease any time that the current feedback is below that level.

                                       If this level reaches 100% and the drive trips, a reset will not be allowed until this level has decreased to 15%.

                                               

Code 1504     Fault name : Comm Fault Time

                     Description : This is the time used to determine a communication fault.

 

 

 

 

 

Équivalents: 
TRU-360 Eaton
TRU-360 Cuttler Hammer
MKS-360 ABB (Standard unit)
MKS-360-OT ABB (Standard unit)
Ampérage: 360 Ampères
Tension:
Entre 250 et 300 HP à 575V
Entre 200 et 300 HP à 460V
Série:MS6

INSPECTION GRATUITE POUR CE DÉMARREUR PROGRESSIF

MS6-360 (Standard Unit) Saf

bottom of page