SGDV-120A01A Yaskawa
1.5 kW , Serial Sigma V (SGDV)
Error codes
A.050 Alarm name : Combination Error
Meaning : The servopack and the linear servomotor capacities do not match each other.
A-0b0 Alarm name : Cancelled Servo ON Command Alarm
Meaning : The servo ON command was sent from the host controller after the utility function was executed to turn the power to linear servomotor ON.
A.100 Alarm name : Overcurrent or Heat Sink Overheated
Meaning : An overcurrent flowed through the IGBT.
Heat sink of the servopack was overheated.
A.300 Alarm name : Regeneration Error
Meaning : Regenerative circuit or regenerative resistor is faulty.
A.320 Alarm name : Regenerative Overload
Meaning : Regenerative energy exceeds regenerative resistor capacity.
A.330 Alarm name : Main Circuit Power Supply Wiring Error
Meaning : Setting of AC input/DC input is incorrect.
Power supply wiring is incorrect.
A.400 Alarm name : Overvoltage
Meaning : Main circuit DC voltage is excessively high.
A.410 Alarm name : Undervoltage
Meaning : Main circuit DC voltage is excessively low.
A.510 Alarm name : Overspeed
Meaning : The linear servomotor speed iso vert the maximum allowable speed.
A.710 Alarm name : Overload : High Load
Meaning : The linear servomotor was operating continuously for several seconds to several tens of seconds under a force largely exceeding ratings.
A.7A0 Alarm name : Heat Sink Overheated
Meaning : The temperature of the servopack heat sink exceeded 100°C.
A.861 Alarm name : Motor Overheated
Meaning : The internal temperature of motor is too high.
A.C90 Alarm name : Encoder Communications Error
Meaning : Communications between the servopack and the linear scale is not possible.
A.910 Warning name : Overload
Meaning : This warning occurs before the overload alarm (A.710 or A.720) occur. If the warning is ignored and the operation continues, an overload alarm may occur.
A.920 Warning name : Regenerative Overload
Meaning : This warning occurs before the regenerative overload alarm (A.320) occurs. If the warning is ignored and operation continues, a regenerative overload alarm may occur.
