top of page

SGMPH-02A1A41 Yaskawa

Cross references: SGMPH-02A1A4C Yaskawa SGMPH-02A1A61 Yaskawa SGMPH-02A1E41D Yaskawa SGMPH-02A1E4C Yaskawa SGMPH-02A1E4CD Yaskawa SGMPH-02AAA2S Yaskawa SGMPH-02AAA41 Yaskawa SGMPH-02AAA4C Yaskawa SGMPH-02AAE41 Yaskawa SGMPH-02AAE41D Yaskawa SGMPH-02AAE4C Yaskawa SGMPH-02AAE4CD Yaskawa SGMPH-02AAE4ED Yaskawa SGMPH-02AAE4SD Yaskawa /SGMPH-02A1A41-OY Omron Round per minute: 3000/5000 RPM Voltage: 200 V
Serial: Sigma II

CANADA YASKAWA AUTHORIZED SERVICE CENTRE

Numéro de pièce du fabricant : 

123-456-789

Manufacturer part number : 

SGMPH-02A1A41

Détails

SGMPH-02A1A41 Yaskawa

 

 

0.2 kW , 3000/5000 RPM, Serial Sigma II (SGMGH) 

 


Solutions for problems encountered

 

 

 

 

A good-conditioned servomotor operating in an ideal environment can have a very long life span. We are talking about thirty years. During these years, he may encounter troubles that require a specialist's intervention. Here are some examples of problems that can happen:

 

Faulty encoder: When you see the error codes AC9 or AC90 [error code on Yaskawa Products] on your servo-drive, there is a strong likelihood that the encoder is defective.

 

Brake that sticks: when the brake sticks, the motor must use more current in order to do the same work as in normal time. In this case, your servo-drive may present the error code Over Current A10 [error code on Yaskawa products].

 

Motor overheating: There may be several causes for an overheating engine. Prematurely worn bearings, damaged brake or improper parameterisation of the servomotor in the servo-drive when the servomotor configuration does not correspond to the correct application of the servomotor.

 

Motor Vibration: When the motor is unbalanced, it starts to vibrate. Without immediate maintenance, the vibrations will become stronger, which will damage the servomotor. Worn bearings and bearing cages can cause vibration. The more vibration, the more the encoder is likely to get damaged. When the actuator is noisy, there is a good chance that it will be unbalanced.

 

Broken motor Connector: In addition to damaging the motor, this can also damage the servo-drive by causing a short circuit.

 

Unplugged Actuator Connector: A connector that is not plugged into the servomotor, can create a warm up and cause faults such as over Current A10 [error code on Yaskawa products]. This could also damage the servo-drive by causing a short circuit.

 

Accumulation of metal dust on the encoder: When the brake and bearings wear out, they can send metal dust to the encoder. This may affect the readings of the encoder.

 

 

 

 

Équivalents: 
SGMPH-02A1A4C Yaskawa
SGMPH-02A1A61 Yaskawa
SGMPH-02A1E41D Yaskawa
SGMPH-02A1E4C Yaskawa
SGMPH-02A1E4CD Yaskawa
SGMPH-02AAA2S Yaskawa
SGMPH-02AAA41 Yaskawa
SGMPH-02AAA4C Yaskawa
SGMPH-02AAE41 Yaskawa
SGMPH-02AAE41D Yaskawa
SGMPH-02AAE4C Yaskawa
SGMPH-02AAE4CD Yaskawa
SGMPH-02AAE4ED Yaskawa
SGMPH-02AAE4SD Yaskawa
/SGMPH-02A1A41-OY Omron

Tours par minute: 3000/5000 RPM
Tension: 200 V
Série: Sigma II


CENTRE DE SERVICE AUTORISÉ YASKAWA AU CANADA

SGMPH-02A1A41 Yaskawa

bottom of page